4. CONFIGURATION
4.23
Scripts
There is possibility to create your own shell scripts executed in the specific situations. Go
to the
Scripts
page in the
Configuration
section in the menu. The menu item will expand and
there are
Startup Script
,
Up/Down IPv4
and
Up/Down IPv6
scripts you can use – there is IPv4
and IPv6 independent dual stack. For more examples of Scripts and possible commands see
the Application Note
Commands and Scripts
4.23.1
Startup Script
Use the
Startup Script
window to create your own scripts which will be executed after all of
the initialization scripts are run – right after the router is turned on or rebooted. The changes
in settings will apply after pressing the
Apply
button.
Any changes to the
Startup Script
will take effect the next time the router is power cycled
or rebooted. This can be done with the
Reboot
button in the
Administration
section, or
by SMS message.
4.23.2
Example of Startup Script
Figure 68: Example of a Startup Script
103
Summary of Contents for SmartMotion
