AZZA P4X2 Series, User Manual, Page: 33 / 49

The AZZA P4X2-A MAINBOARD SERIES
Page 32
OS Select For DRAM > 64MB
Only select OS2 if you are running an OS/2 operating system with a RAM greater than 64
Mb. Otherwise, for all other operating systems, use the default setting “Non-OS2”
HDD S.M.A.R.T Capability
You may “enable” this option if your Hard Drive supports the S.M.A.R.T. technology (Self
Monitoring Analysis Reporting Technology) feature. S.M.A.R.T. will monitor and report your
Hard Drive health status. Ask your Hard Drive Vendor for further information.
Note! Using this feature may decrease system performance.
Video BIOS Shadow
These fields allow you to change the Video BIOS location from ROM to RAM. Information
access is faster through RAM than ROM. Therefore when you enable this option you will en-
hance your system performance.
3.5.1. Dram Clock Drive Control
This field allows you to select the FSB and DRAM frequency.
PC
B
I
O
S
PC
B
I
O
S
PC
B
I
O
S
PC
B
I
O
S
3.5. Advanced Chipset Features
CMOS Setup Utility - Copyright ( C ) 1984 – 2001 Award Software.
Advanced Chipset Features
! ! ! !
DRAM Clock/Drive Control
!
! !
! AGP & P2P Bridge Control
! ! ! !
CPU & PCI Bus Control
Memory Hole
System BIOS Cacheable
Video RAM Cacheable
Delay Prior to Thermal
Item Help
Menu Level
! ! ! !
[Press Enter]
[Press Enter]
[Press Enter]
[Disabled]
[Disabled]
[Disabled]
[16 min]
CMOS Setup Utility - Copyright ( C ) 1984 – 2001 Award Software.
Dram Clock and Drive Control
Current FSB Frequency
Current DRAM Frequency
DRAM Clock
DRAM Timing
X SDRAM Cycle Length
X Bank Interleave
X Precharge to Active (Trp)
X Active to Precharge (Tras)
X Active to CMD (Trcd)
X DRAM Burst Len
DRAM Command Rate
Item Help
Menu Level
!
! !
!
100 MHz
133 MHz
[By SPD]
[By SPD]
2.5
Disabled
3T
6T
3T
4
[2T Command]
BIOS Management