Aztech DSL700P, User Manual, Page: 8 / 48

8
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2. Before You Begin
2.1.2 Software - Operating System
• Windows
®
98
• Windows ® 98 Second Edition
• Windows
®
Me
• Windows
®
XP
• Windows ® 2000
2.2 Safety Precaution
• Do not remove your card from its protective bag until you are ready to install
it.
• Always try to hold your card by its edges. Avoid touching any electronic
components on your card.
• Static electricity can cause permanent damage to your card. To prevent such
a damage, you must ground yourself during the installation:
» Use a grounding strap - a coiled wire with a clip at one end and an
elastic strap at the other. Wear the strap around your wrist and attach
the clip to any non-painted metal surface of your computer chassis.
» If you do not have a grounding strap, touch any non-painted surface of
your computer chassis before you begin installation, and again every
minute or so until the installation is completed.
2.3 Installation Notes
• The graphics and screen illustrations shown in this manual may differ from
what you see in your system, but the steps still apply.
• A Philips screwdriver is required.
• The documentation for your computer should come in handy during the
installation. Have it ready by your side.
• You may be prompted for your Windows CD-ROM during the driver installation.
Have it ready by your side.
All manuals and user guides at all-guides.com