Copyright © Azoteq (Pty) Ltd 2021.
AZBAT48100B Product Manual
Page 2 of 17
All Rights Reserved.
Revision 1.00
February 2021
Azoteq
PowerSense
®
Series
Revision History
Version
Release date
Change Notes
1.00
15 January 2021
Initial release
Disclaimer
This product manual provides further detail on the AZBAT48100B LiFePO4 battery. Please read the
operating instructions in this document before using the battery. Also familiarise yourself with the
warranty conditions of this product to ensure it is operated within stipulated requirements.
Please download the battery registration documents from the Azoteq website (
and return it to us to activate your warranty.
Overview
The AZBAT48100B incorporates 30x 3.2V (15S2P configuration); 50Ah Lithium-Iron Phosphate
(LiFePO4) cells with a 1C charge and discharge rating. The battery incorporates a battery
management system (BMS) which provides the following functionality:
•
Protection
o
Over discharge
o
Over charge
o
Short circuit
o
Over and under temperature
o
Impulse voltage
•
Control
o
Charge and discharge current
o
Cell balancing
•
Communication
o
CANBUS communication port to interface with the inverter.
o
MODBUS ports for parallel connections between batteries and for firmware updates
as well as battery monitoring.
The BMS has been tested with leading inverters, including SunSynk, Victron and GoodWe and has
been IEC 62619 certified.
The battery is mounted in a durable 5U steel casing and fits in a standard 19-inch rack. The battery
has 2x M8 terminal connections on the front for a sturdy connection to the battery cables.
