Te ch n ica l I n for m a t ion :
HOPPER U – I I cct alk
2 0
Con n e ct or for com m u n ica t ion w it h Az k oye n t ools.
This connect or is used t o carry out com m unicat ion wit h t he Azkoyen t ools. ( See chapt er “
) . I t is a 6- pin connect or wit h t he following pin out :
Pin
Fu n ct ion
1 -
2 GND
3 RX
4 -
5 TX
6 + 5V
Figur e 1 8 . Posit ion of t h e sw it ch e s
4 .7 .
COI N EXTRACTOR D I SK
The disk picks up t he coins in t he coin bay and carries t hem t o a posit ion t o be ej ect ed from t he
hopper. The cogs on t he out side of t he disk m esh w it h t he reduct ion gear, which m akes it spin.
I t has ridges t o hold t he coins and drag from t he bot t om of t he coin bay t o t op where t hey are
ej ect ed by t he t rigger.
The disk has pivot s t hat are used t o m ove t he coins in t he coin bay. The knob on t he disk
m oves t he flap.
There are t hree different coin
ext ract or disks
. The t hree accept t he sam e t hickness coins which
are bet ween 1.2 m m m inim um and 3.5 m m m axim um .
D isk w it h 8 r idge s a n d a r e d pivot
: for coins wit h diam et ers bet ween 18 and 30 m m .
This disk can reach a payout speed of 5.3 coins/ second.
D isk w it h 1 2 r idge s a n d a ye llow pivot
: for coins w it h diam et ers bet ween 12 and 20
m m . This disk can reach a payout speed of 8 coins/ second.
D isk w it h 7 r idge s a n d a bla ck pivot
: for coins wit h diam et ers bet ween 20 and 32
m m . This disk can reach a payout speed of 4.6 coins/ second.
Figur e 1 9 Type s of disk .
10239 EN 03 - 2007
