Configuration and structure of measuring system
Azbil Corporation
1-4
Model MCB10A
1-1-3 :
Loop configuration for pulse output
An example of loop configuration is shown. Instantaneous flow rate values measured
by this instrument are delivered as a pulse output with the specified pulse width and
pulse weight.
In addition to an analog signal, this loop configuration allows the instrument to
deliver a pulse output to an electronic counter, sequencer or other host control system
or counter.
Electronic counter
(Capable of receiving
open-collector output signal)
Figure 1-3
Loop configuration for pulse output
•
Electromagnetic flowmeter (main unit): Measures flow rate and outputs a pulse
output signal to an electronic counter. Displays the measured flow rate as a flow
rate value.
•
Electronic counter: Receives the pulse output as input and displays the totalized
value. Batch or other types of control take place based on the totalized value on
the electronic counter.
•
Open collector: A pulse output method using a transistor contact.
Summary of Contents for MCB10A
Page 42: ...Instrument installation Azbil Corporation 2 20 Model MCB10A...
Page 104: ...Operation using the data setting device Azbil Corporation 5 56 Model MCB10A...
Page 112: ......
Page 114: ......