Azbil MagneW FLEX+, User Manual

Page: 20 / 88

Introduction Azbil Corporation
1-6 MagneW
FLEX+/PLUS+
Electromagnetic Flowmeter Detector
1.3.2: Flange type detector
A Flange detector consists of the components shown in the figure below.
Mounting screw
(4 places)
Electrode cover
Waterproof gland
Grounding terminal
Terminal box cover
Terminal box
Flow direction mark
Flange
Grounding ring
Figure 1-5 Flange detector main parts
Name Function
Flow direction mark Indicates the direction of fluid flow. Mount the detector
so that the measured fluid flows in the direction indicated
by this mark.
Electrodes
Detect an electromagnetic force signal proportional to
the flow rate of the fluid passing through the detector.
The electrode material varies depending on the corrosion
characteristics of the fluid to be measured.
Electrode cover Houses the electrodes. Do not remove the cover with the
detector installed on a pipe.
Grounding rings Keep reference voltage as zero by grounding the unit.
The grounding ring material varies depending on the
corrosion characteristics of the fluid to be measured.
Terminal box
(Remote model only)
Houses the connection terminals used for applying
a standard voltage. Houses the excitation and signal
terminals.
Terminal box cover
(Remote model only)
Keeps the terminals dry and protected. Keeps the
terminal box cover on during operation.