27
Chapter 5. Installation
5-1. Place of installation
When selecting a place for installation for the instrument, take into consideration these
matters related to instrument inspection, maintenance, longevity, and operation safety.
(1) Select a place where temperature change is minimal (within the limits of -30°C to +80°C).
Avoid a place where the instrument may be exposed to high temperature by radiation
from a source of heat.
If water is being measured, be careful of freezing which may cause damage to the meter
body. Take appropriate measures to guard against freezing.
(2) Select a place where is reasonably free from humidity and vibration.
(3) Be sure there is enough space to insert a screwdriver for adjustment and span change.
5-2. Positioning
Install the meter body in such attitude that its diaphragm or bellows planes are made vertical.
5-3. Bracket and bolts
There are two types of mounting brackets. The bracket and bolts for installation are supplied
with each meter body.
For 11/22 and 71/72 models
For 44 model
For 33, 81 and 82 models
Fig. 5-1. Mounting brackets
