3-10
Chapter 3. HOW TO USE THE LOADER
Writing parameters to the device
This section describes the procedure for writing parameters to the device.
After reading parameters to the loader, perform the following operations.
Handling Precautions
•
Parameters cannot be written to the device if the model number of the device
is different from the number in the [Device info.] tab.
However, because the underlined digits in the following example represent
the device specifications that do not affect the loader function, even if there
are discrepancies in these digits, parameters can be written to the device.
Example: F7M9010AQ100100Y0
(1) Activate communication with the device.
(
3 - 2 Connecting the Loader to the Device (P. 3-3)
(2) On the menu bar, select
[Parameters]
→
[Write parameters to the device]
, or
click the button on the toolbar.
>> The following screen is displayed.
(3) Click the
[OK]
button.
>> The following screen is displayed.
(4) Click the
[OK]
button.
