1-12
Chapter 1. INTRODUCTION
(7) Click the
[Finish]
button.
>> The following screen is displayed.
(8) Click the
[Finish]
button.
Installation of the device driver is complete.
If the USB loader cable device driver cannot be installed
When attempting to install the device driver on a PC on which a USB loader cable
was used in the past, the following window may appear, and it may not be possible
to install the driver, even if the previous device driver has already been uninstalled.
In this case, follow the procedure below.
Step 1. Install tools other than the driver as instructed in the window.
