1
Chapter 1. Identification
1-1. Device designation
1-1-1. Nameplate
The right device?
Compare the nameplate on the device with the following graphic:
A
T
T
85
-xxxxx
Fig 1-1. Nameplate of the head transmitter (example, non-Ex version)
1 Approval information (optional)
2 Serial number
3 Device revision
4 Power supply and current consumption
5 Device identification number and communication symbol
1-2. Scope of delivery
The scope of delivery of the device comprises:
Temperature transmitter
Securing material
User's Manual
Additional documentation for devices that are suitable for use in hazardous areas, such as
Safety Instructions, Control or Installation Drawings.
1-3. Certificates and approvals
The device is designed in accordance with good engineering practice to meet state-of-the-
art safety requirements, has been tested and left the factory in a condition in which it is safe
to operate. The device complies with the standards EN 61 010-1 “Protection Measures for
Electrical Equipment for Measurement, Control, Regulation and Laboratory Procedures” and
with the EMC requirements of IEC/EN 61326.
1-3-1. CE mark, declaration of conformity
The device described in these User's Manual is therefore in conformity with the statutory
requirements of the EU Directives. The manufacturer confirms a positive completion of all
tests by fitting the unit with a CE mark.