18
4-2. Display and operating elements
4-2-1. Display
1
2
3
4
5
6
7
Fig. 4-2. Optional LC display of the head transmitter
4-2-2. Display symbols
Item
No.
Function
Description
1
Displays the TAG
TAG, 32 characters long.
2
'Communication' symbol
The communication symbol appears when read and write-
accessing via the Foundation Fieldbus™ protocol.
3
Unit display
Unit display for the measured value displayed.
4
Measured value display
Displays the current measured value.
5
Channel display C1 or C2, P1, S1
e.g. C1 for a measured value from channel 1.
6
'Configuration locked' symbol
The 'configuration locked' symbol appears when configuration
is locked via the hardware.
7
Warning or error message
If a warning occurs, the display alternates between the
measured value and the warning code. If an error occurs, the
display alternates between the error code and “- - - -” (no valid
measured value available), (See Section 7-2 ‘Status messages’.)
4-2-3. Local operation
You can make hardware settings for the Foundation Fieldbus™ interface using miniature
switches (DIP switches) on the rear of the optional display
→