Assembling Process for wall mount
Preparation stage:
Please remove the four M6*10 Screws on the heater, and use them
for
Step 2
Step 1: Assemble the bracket. (
③
,
○
4
,
⑥
,
⑦
,
⑧
)
Do not tighten the four M6*10 screws
③
, reserve 2-3 mm of gap for
step 4.
Step 2: Install the bracket on the back of the heater.
Adjust the four sliders inside the track to the middle of the heater.
Attach the bracket which you assembled in step 1 with four M6*10
screws
○
3 , tighten them with ‘L ‘hexagonal wrench
○
10
。
Step 3:
Fix bracket part 1
○
1 on the wall, tighten the four nuts (a part
of anchor bolt M6*50)
○
2 with M6 spanner
○
9