background image

®

1

Start Here

Quickstart Guide - AyrMesh

®

 IndoorHub

- IndoorHub
- USB Power Supply 
- USB micro cable
- Ethernet Cable 

MAC Address

Write down the MAC address 
of your IndoorHub, write it here, 
and keep it in a safe place:

If you don't have an account, sign up for one

on AyrMesh.com

Use a computer connected

to the same port you're 

using for the IndoorHub!

Turn over for one-page "Ultra 

uickStart" Instructions.

Please visit 

http://support.ayrstone.com

 for detailed instructions,

videos, slide shows, and a troubleshooting guide

.

00:11:22:33:44:55

0C:EF:

(Underside)

AyrMesh IndoorHubs can be used two ways: as a Gateway, which is a simple access 
point, and as a Remote, which acts as a wireless extender for an IndoorHub Gateway.

Check the contents of the box:

Summary of Contents for AyrMesh IndoorHub

Page 1: ...com Use a computer connected to the same port you re using for the IndoorHub Turn over for one page Ultra uickStart Instructions Please visit http support ayrstone com for detailed instructions videos slide shows and a troubleshooting guide 00 11 22 33 44 55 0C EF Underside AyrMesh IndoorHubs can be used two ways as a Gateway which is a simple access point and as a Remote which acts as a wireless ...

Page 2: ... to AyrMesh com and downloaded its con guration For a Gateway IndoorHub one connected to your network with an Ethernet cable that s it mount the IndoorHub where you want it For a Remote IndoorHub that indicates it is initialized It can be disconnected from the Ethernet and moved wherever you want it to be installed And then connect the IndoorHub to your network with an Ethernet cable use either po...

Page 3: ... second o indicates a very strong signal while 4 seconds on and 4 seconds o indicates a very weak signal 4 Troubleshooting If a Gateway IndoorHub s light is blinking quickly then the device it s connected to may not be online Make sure the Bridge Receiver Hub or router it is connected to is actually online and able to reach the Internet If a Remote IndoorHub s light is blinking quickly then it can...

Page 4: ...onnected to the same router you ll connect the IndoorHub to Otherwise you may need to enter the MAC address manually 2 ASSEMBLE Connect the IndoorHub to the power supply with the USB cable 1 0C EF MAC Addr 3 INITIALIZE With an Ethernet cable connect one of the Ethernet ports of the IndoorHub to your network router Hub Receiver Bridge radio etc then plug in the power supply Wait until the IndoorHub...

Reviews: