AXXIV Serius 15S10, Manual

Page: 231 / 250

Interface (Ports & Jacks)
Interface (Ports & Jacks) A - 3
A
USB 2.0/1.1 Ports
USB 3.0 Port
These USB 2.0 compatible ports (USB 2.0 is fully USB 1.1 compliant) are for low-speed
peripherals such as keyboards, mice or scanners, and for high-speed peripherals such as
external HDDs, digital video cameras or high-speed scanners etc. Devices can be plugged into
the computer, and unplugged from the computer, without the need to turn the system off (if the
power rating of your USB device is 500mA or above, make sure you use the power supply which
comes with the device).
The USB 3.0 ports are denoted by their blue color; USB 2.0 ports are colored black. USB 3.0 will
transfer data much faster than USB 2.0, and is backwards-compatible with USB 2.0.
Note that the USB 3.0 port requires a driver installation (see “USB 3.0” on page 4 - 7 ), does not
support wake on USB and is not operational under DOS.
*Note: The powered USB 2.0 port (see “System Map: Right & Rear Views” on page 1 - 12 )
may be toggled on /off by means of the Fn + Power Button key combination. When the powered
USB port is on it will supply power when the system is off but still powered by the AC/DC adapter
plugged into a working outlet, or powered by the battery with a capacity level above 20% (this may
not work with certain devices - see page
8 - 11 ).
Item Description
3.
0