manualshive.com logo in svg

AXXIV Serius 15S10, Manual

Share
Download
AXXIV Serius 15S10 Manual Download Page 147

Modules & Options

Fingerprint Reader Module 7 - 29

7

Fingerprint Reader Module

The fingerprint reader module provides a high level of security for your computer.
Make sure you have administrator’s rights to your computer, and have a 

Windows

password enabled for full security protection.

Fingerprint Reader Driver Installation

1.

Insert the 

Device Drivers & Uti User’s Manual 

disc into the CD/

DVD drive.

2. Click 

Option Drivers

.

3. Click 

3.Install Fingerprint Driver > Yes

.

4. Click 

Next > Next > Next

.

5. Click 

Finish > Yes

 to restart the computer.

6. Click the tray icon 

, scan a finger or click 

Start > Programs/All Pro-

grams > Protector Suite > Control Center and

 then begin the enrollment 

process (see over).

Summary of Contents for Serius 15S10



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands