background image

CAUTION! 

 All accessories, switches, climate 

controls panels, and especially air bag indicator 

lights must be connected before cycling the 

ignition. Also, do not remove the factory radio 

with the key in the on position, or while the 

vehicle is running. 

CHTO-03

I N S TA L L AT I O N I N S T R U C T I O N S

AxxessInterfaces.com 

© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION 

REV. 1/15/18 INSTCHTO-03

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Cutting tool • Crimping tool • Tape 
• Connectors (example: butt-connectors, bell 
caps, etc.)

TABLE OF CONTENTS

Connections to be made ....................................2-3
Installing the CHTO-03 ...........................................3
Testing the CHTO-03 ..............................................3

Chrysler

 

vehicles

 

2007-up*

APPLICATIONS

See inside front cover

•  Provides accessory (12-volt 10 amp)
•  Retains R.A.P. (retained accessory power)
•  Used in amplified, non-amplified systems, or digital amplified systems 
•  Provides NAV outputs (parking brake, reverse, and V.S.S.)
•  ASWC-1 harness included (ASWC-1 sold separately)

•  Adjustable gain control for overall volume (on amplified systems)
•  Retains blind spot detection system (if equipped)
•  High level speaker input
•  Micro “B” USB updatable
•  Retains balance and fade

• CHTO-03 Interface
• 16-pin harness with stripped leads
• 10-pin harness to 22-pin Chrysler harness with stripped leads
• 4-pin harness with stripped leads

*Visit 

AxxessInterfaces.com

 for up-to-date vehicle specific applications.

Summary of Contents for CHTO-03









Reviews: