background image

AXDSPX-HK1

I N S T A L L A T I O N   I N S T R U C T I O N S

AxxessInterfaces.com 

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION 

REV. 7/30/20 INSTAXDSPX-HK1

Google Play Store

Apple App Store

iOS 12.1 or higher

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun, 
  solder, and heat shrink • Tape • Wire cutter
• Zip ties • Multimeter

TABLE OF CONTENTS

Installation Options ...............................................2
Installation .............................................................2
Connections ........................................................ 3-4
Mobile App ........................................................ 5-13
Specifications ....................................................... 14

Hyundai/Kia

 DSP Interface With Pre-Wired 

Harness 2010-2017

•  Includes a DSP (Digital Signal Processor)
•  31 Band graphic EQ
•  10 individually assignable outputs
•  Independent equalization on each of the 10 outputs
•  Independent high pass, low pass, and bandpass filters
•  Each channel can be delayed independently up to 10ms
•  Clipping detection and limiting circuits
•  Designed for non-amplified models
•  Easy behind the radio installation with pre-wired harness
•  Bass knob included for level control of subwoofer amp
•  Settings adjusted via Bluetooth

®

 in a smart device application (tablet 

or mobile phone), compatible with both Android and Apple devices

•  Read, write, and store configurations for future recall
•  Password protect feature available in the mobile app
•  Micro-B USB updatable

• AXDSPX-HK1 interface
• AXDSPX-HK1 interface harness
• AXDSPX-HK1 vehicle T-harness • Bass knob

APPLICATIONS

Visit axxessinterfaces.com for current application list

Summary of Contents for AXDSPX-HK1

















Reviews: