manualshive.com logo in svg

Axxess AXDSP-L, Installation Instructions Manual

Share
Download
Axxess AXDSP-L Installation Instructions Manual Download Page 1

AXDSP-L

I N S T A L L A T I O N   I N S T R U C T I O N S

AxxessInterfaces.com 

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION 

REV. 3/2/20 INSTAXDSP-L

Google Play Store

Apple App Store

iOS 12.1 or higher

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun, 

  solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter

TABLE OF CONTENTS

Preface ....................................................................2
Installation Options ...............................................3
Installation .............................................................3
Connections ........................................................ 4-7
AXDSPL-BT Installation ..........................................8
AXDSPL-SP Installation ..........................................9
Mobile App ...................................................... 10-19
Pinout ...................................................................20
Specifications ........................................................21

Axxess 6-Channel Digital Signal Processor

•  15 Band graphic EQ
•  4 inputs and 6 outputs, including front, rear, and subwoofer
•  Independent equalization for front, rear, and sub
•  Independent crossover for front, rear, and sub
•  Selectable slope (12, 24, 36, or 48db per octave)
•  Front and rear channels can be delayed independently up to 10ms
•  Easy behind the radio installation in most applications
•  Can be used with OE and aftermarket radios
•  Chime control for GM/Chrysler vehicles
•  Clipping detection and limiting circuits

•  Internal header port for adding interface modules
•  Bass knob included
•  Retains OE voice prompts (SYNC® and OnStar®)
•  Retains factory chimes including parking sensor and cross path 

detection alerts

•  Settings adjusted via Bluetooth® in a smart device application (tablet 

or mobile phone), compatible with both Android and Apple devices

•  Read, write, and store configurations for future recall
•  Password protect feature available in the mobile app
•  Micro-B USB updatable

• AXDSP-L interface
• AXDSP-L harness (16-pin & 20-pin)

Summary of Contents for AXDSP-L























Reviews:

No comments

Brands by name

Popular brands

Load more brands