CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AX-LR90102
I N S TA L L AT I O N I N S T R U C T I O N S
AxxessInterfaces.com
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
REV. 5/11/18 INSTAX-LR90102
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.) • Zip ties
TABLE OF CONTENTS
Connections to be made .......................................2
Installing the AX-LR90102 interface .....................3
Programming the ASWC-1 interface ................. 3-4
Land Rover
Freelander 2
(with M.O.S.T. 25 amplifier)
Data Interface with SWC
2006-2014*
• Provides accessory power
• Retains R.A.P. (retained accessory power)
• Designed for amplified models
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Retains parking sensor chimes
• Retains balance
• Micro “B” USB updatable
• AX-LR90102 interface
• AX-LR90102 amplifier interface
• AX-LR90102 chime retention interface
• ASWC-1 interface
• AX-LR90102 harness
• ASWC-1 harness
• Female 3.5mm connector with stripped leads
• M.O.S.T. jumper harness
• Chime speaker
* NAV screen will only show LR logo
