Axxess AX-ADCT2 Installation Instructions Download Page 1

AX-ADCT2

AX-ADCT2

AX-ADCT2

AX-ADCT2

AX-ADCT2

AX-ADCT2

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

The 

AX-ADCT2

 should be installed on a stereo’s speaker 

output wires or the output wires on an OEM amplifier of up to 80 

watts per channel. These wires can be found behind the stereo 

in the dash, on the outside of an OEM amplifier, or on the input 

terminals on the OEM speakers.

Wire Color & Function:

 The audio input wire colors are an EIA 

standard for 

car stereo 

applications as follows:

YELLOW = B12V Input
BLACK = GROUND Input
BLUE = 12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input 
WHITE/BLACK = LEFT Front (-) Input 
GRAY = RIGHT Front (+) Input 
GRAY/BLACK = RIGHT Front (-) Input 

BLACK/WHITE = Reference Ground (-) (REFERENCE 

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE:

 Be sure that all audio input connections are polarized or 

in phase with each other. That is, the positive output wires from 

the audio source need to be connected to the corresponding 

positive input wires of the AX-ADCT2. The same goes for the 

negative audio wires. Failure to do this will result in poor bass 
response and low quality audio.

The 

AX-ADCT2

should be installed on a stereo’s speaker 

output wires or the output wires on an OEM amplifier of up to 80 

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplifier, or on the input 

terminals on the OEM speakers.

Wire Color & Function:

The audio input wire colors are an EIA 

standard for car stereo applications as follows:

YELLOW = B12V Input
BLACK = GROUND Input
BLUE = 12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input 
WHITE/BLACK = LEFT Front (-) Input 
GRAY = RIGHT Front (+) Input 
GRAY/BLACK = RIGHT Front (-) Input 

BLACK/WHITE = Reference Ground (-) (REFERENCE 

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE:

 Be sure that all audio input connections are polarized or 

in phase with each other. That is, the positive output wires from 

the audio source need to be connected to the corresponding 

positive input wires of the AX-ADCT2. The same goes for the 

negative audio wires. Failure to do this will result in poor bass 
response and low quality audio.

The 

AX-ADCT2

should be installed on a stereo’s speaker 

output wires or the output wires on an OEM amplifier of up to 80 

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplifier, or on the input 

terminals on the OEM speakers.

Wire Color & Function:

The audio input wire colors are an EIA 

standard for car stereo applications as follows:

YELLOW = B12V Input
BLACK = GROUND Input
BLUE = 12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input 
WHITE/BLACK = LEFT Front (-) Input 
GRAY = RIGHT Front (+) Input 
GRAY/BLACK = RIGHT Front (-) Input 

BLACK/WHITE = Reference Ground (-) (REFERENCE 

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE:

 Be sure that all audio input connections are polarized or 

in phase with each other. That is, the positive output wires from 

the audio source need to be connected to the corresponding 

positive input wires of the AX-ADCT2. The same goes for the 

negative audio wires. Failure to do this will result in poor bass 
response and low quality audio.

The 

AX-ADCT2

should be installed on a stereo’s speaker 

output wires or the output wires on an OEM amplifier of up to 80 

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplifier, or on the input 

terminals on the OEM speakers.

Wire Color & Function:

The audio input wire colors are an EIA 

standard for car stereo applications as follows:

YELLOW = B12V Input
BLACK = GROUND Input
BLUE = 12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input 
WHITE/BLACK = LEFT Front (-) Input 
GRAY = RIGHT Front (+) Input 
GRAY/BLACK = RIGHT Front (-) Input 

BLACK/WHITE = Reference Ground (-) (REFERENCE 

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE:

 Be sure that all audio input connections are polarized or 

in phase with each other. That is, the positive output wires from 

the audio source need to be connected to the corresponding 

positive input wires of the AX-ADCT2. The same goes for the 

negative audio wires. Failure to do this will result in poor bass 
response and low quality audio.

The 

AX-ADCT2

should be installed on a stereo’s speaker 

output wires or the output wires on an OEM amplifier of up to 80 

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplifier, or on the input 

terminals on the OEM speakers.

Wire Color & Function:

The audio input wire colors are an EIA 

standard for car stereo applications as follows:

YELLOW = B12V Input
BLACK = GROUND Input
BLUE = 12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input 
WHITE/BLACK = LEFT Front (-) Input 
GRAY = RIGHT Front (+) Input 
GRAY/BLACK = RIGHT Front (-) Input 

BLACK/WHITE = Reference Ground (-) (REFERENCE 

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE:

 Be sure that all audio input connections are polarized or 

in phase with each other. That is, the positive output wires from 

the audio source need to be connected to the corresponding 

positive input wires of the AX-ADCT2. The same goes for the 

negative audio wires. Failure to do this will result in poor bass 
response and low quality audio.

The 

AX-ADCT2

should be installed on a stereo’s speaker 

output wires or the output wires on an OEM amplifier of up to 80 

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplifier, or on the input 

terminals on the OEM speakers.

Wire Color & Function:

The audio input wire colors are an EIA 

standard for car stereo applications as follows:

YELLOW = B12V Input
BLACK = GROUND Input
BLUE = 12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input 
WHITE/BLACK = LEFT Front (-) Input 
GRAY = RIGHT Front (+) Input 
GRAY/BLACK = RIGHT Front (-) Input 

BLACK/WHITE = Reference Ground (-) (REFERENCE 

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE:

 Be sure that all audio input connections are polarized or 

in phase with each other. That is, the positive output wires from 

the audio source need to be connected to the corresponding 

positive input wires of the AX-ADCT2. The same goes for the 

negative audio wires. Failure to do this will result in poor bass 
response and low quality audio.

Reviews: