ABMAX A
CCESS
P
OINT
I
NSTALLATION
AND
M
AINTENANCE
G
UIDE
V
ERSION
1.1
29
8.2 Hooking up the NIA/Power Adapter
It is extremely important to connect the AC power to the NIA as the last step. Connecting
AC power prematurely can damage the CPE and lead to faulty behavior.
Note:
The NIA/Power Adapter does not come with cables or power cord. Service provider must
provide their own cables and power cord.
1)
Insert one end of an RJ-45 to RJ-45 Ethernet cable assembly to the external RJ-45 jack on the
outside of the NIA and the other end to the customer's computer (Figure 8-6).
Figure 8-6 Connect customer computer or network device
Note:
Customer equipment requiring Ethernet connectivity may not be located more than 100 m
(328 ft) from the CPE.
2)
Check to see that the connection to the CPE is in place.
