Axor Urquiola 11443007, Instructions For Use/Assembly Instructions

Page: 3 / 20

0 3
S A F E T Y N O T E S
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
Do not allow the streams of the shower touch sensitive
body parts (such as your eyes). An adequate distance
must be kept between the shower and you.
The product may not be used as a holding handle. A
separate handle must be installed.
The hot and cold supplies must be of equal pressures.
I N S T A L L A T I O N I N S T R U C T I O N S
⁄ Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
⁄ The pipes and the fixture must be installed, flushed and
tested as per the applicable standards.
⁄ The plumbing codes applicable in the respective coun-
tries must be observed.
T E C H N I C A L D A T A
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 70°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C ⁄ 4 min
Safety against backflow
The product is exclusively designed for drinking water!
O P E R A T I O N (see page 10)
A S S E M B L Y (see page 04)
D I M E N S I O N S (see page 14)
M A I N T E N A N C E S E C U F L E X H O S E
(see page 12)
Repeat cleaning when pull out becomes difficult.
S P A R E P A R T S (see page 15)
C L E A N I N G (see page 16)
Do not use silicone containing acetic acid!
S Y M B O L D E S C R I P T I O N
F L O W D I A G R A M (see page 14)

Hand shower

Bath Spout
EN