AxonKids Babyfix base Page 8 Instruction Manual Download

Page: 8 / 8

1 A. If the base is assembled with

ISOFIX holders then release this by

pressing down the red ISOFIX re-

straints mechanism button, picture 1,

on both sides.

1 B. If the base is assembled with

the car seatbelt, simply press the latch

on the car belt to release the belt.

2. Fold the ISOFIX holders togeth-

er into the base according to picture 3.

3. Press the release button in the leg

and push the leg upwards to bundle it

up together, picture 2.

4. Fold the leg together underneath

the base and secure it according to pic-

ture 4.

Detach the base from the car seat

Producer:

Axonkids AB

Box 188

53322 Götene

www.axonkids.com

Summary of Contents for Babyfix base

Page 1: ...Babyfix base Instruction manual Tested and approved according to ECE R44 04 Base For babies weighing up to 13kg ...

Page 3: ...rts of the base 1 Backrest 2 ISOFIX guiding arms 3 Fixationhooks for the car belt 4 Leading covers for ISOFIX 5 Releasebutton for childseat 6 Adjustment button for the supportleg 7 Supportleg 8 Belt lock off ...

Page 4: ... the base with the screws included in the box 2 If ISOFIX holding system should be used you need to fold them out ac cording to picture above Warning Dont unfold the ISO FIX holders if you are not going to use them This could create damages to your car interior if they are not used fold them back according to pic 3 4 ...

Page 7: ...e handle upwards the seat should not detach from the base 2 Then push down the handle to position B like in the picture to the right 3 To detach the baby seat from the base push the release button and then lift the seat upwards Warning Always make sure that your child is seated firmly when you lift and carry your child and seat to avoid injuries 7 ...