AxonKids Babyfix base Instruction Manual Download Page 5

Page: 5 / 8

Attaching base to the car seat

You could use either the belts of the

car or the ISOFIX holding system to

fixate the base to the car seat, depen-

dent of your car specifications. If you

are uncertain of which system to use

check your car manual for information.

1. Pull the car seatbelt under the

hooks as shown in picture 1. Lock the

belt, picture 2. Then press the base unit

into the seat and pull the car seatbelt

as far as it will go then attach the belt

lock-off. The belt lock shall always be

on the same side as the car buckle.

2. Extend the leg by pushing the

release button and adjust the length

so that it is fully supported by the car

floor, pic 3. Ensure that the leg is stand-

ing firmly against the floor and that the

base is not able to slip.

3. The base should look like in pic-

ture 4 when it is assembled correct.

Summary of Contents for Babyfix base

Page 1: ...Babyfix base Instruction manual Tested and approved according to ECE R44 04 Base For babies weighing up to 13kg ...

Page 3: ...rts of the base 1 Backrest 2 ISOFIX guiding arms 3 Fixationhooks for the car belt 4 Leading covers for ISOFIX 5 Releasebutton for childseat 6 Adjustment button for the supportleg 7 Supportleg 8 Belt lock off ...

Page 4: ... the base with the screws included in the box 2 If ISOFIX holding system should be used you need to fold them out ac cording to picture above Warning Dont unfold the ISO FIX holders if you are not going to use them This could create damages to your car interior if they are not used fold them back according to pic 3 4 ...

Page 7: ...e handle upwards the seat should not detach from the base 2 Then push down the handle to position B like in the picture to the right 3 To detach the baby seat from the base push the release button and then lift the seat upwards Warning Always make sure that your child is seated firmly when you lift and carry your child and seat to avoid injuries 7 ...