Connecting to a Neurostimulator
37
Connecting to a Neurostimulator
The CP will automatically search for the nearest
2
Neurostimulator
(
①
)
. A scrolling search icon will appear
when the CP is searching for Neurostimulators
(
②
)
.
1
The CP will display the nearest patient device
(
③
)
.
Check the Device ID and the Patient ID to determine if
this is the correct device. New devices will not have
Patient IDs.
Press “Connect”
(
④
)
to connect to the displayed device
.
7
The CP will display a prompt while it connects to and
3
4
retrieves data from the Neurostimulator
(
⑤
)
. When
connected to the device, the CP will automatically
open the
Patient Device
screen.
6
Additional devices can be displayed by the CP if the first
device found is not the targeted Neurostimulator. Press
the down arrow next to “Show Additional Devices”
(
⑥
)
.
This will display up to 3 additional devices found in
proximity of the CP.
5
Note:
Hold the CP within 1 meter (~ 3 feet) of the targeted
device to find the device. If the desired device is not found,
move closer and search again by pressing “Scan Again”
(⑦)
.
