Axon Body 3 Camera
User Manual
Axon Enterprise, Inc.
Page 30 of 44
Care and Maintenance
This section provides information on cleaning, charging, storage, and replacing the battery
for your Axon Body 3 camera.
Cleaning the Camera
Use a soft, damp cloth to clean the surface of the Axon Body 3 camera. Do not use harsh
cleaners or solvents. You may moisten the cloth with isopropyl alcohol.
Do not immerse the Axon Body 3 camera in water or cleaning solutions.
If the Axon Body 3 camera lens becomes dirty, use a lens blower brush to clean it and then
wipe it with a soft cloth if necessary.
If the Axon Body 3 camera display becomes dirty, clean the display with soapy water and
then dry with a soft cloth.
Do not use ammonia-based or similar type window cleaners on the camera lens or camera
display.
Do not place the lens under running water or apply jets of water to the camera lens.
Do not use compressed air to clean the camera. Compressed may damage the camera’s
microphones.
Ensure the Axon Body 3 microphone openings are clean and clear of any debris.
Charging the Battery
The Axon Body 3 camera battery is charged by placing the camera in an Axon Body 3 Dock
or by connecting a USB-C cable to the camera and then to a power adapter or, for USB-C to
USB-A cables, to a computer USB port.
A fully charged camera battery should provide enough power for approximately 12 hours of
normal operation. Recharging a battery after a 12-hour use can take up to 5 hours if you are
recharging your Axon Body 3 camera from Axon Body 3 Dock.
The Axon Body 3 Dock only functions as an Ethernet adapter, an unmanaged network
switch, and charger. This allows your Axon Body 3 camera to be docked in any Axon Body 3
Dock, and still connect to your agency’s Axon Evidence account to upload video.
