Axon Body 3 Camera
User Manual
Axon Enterprise, Inc.
Page 29 of 44
LED Status
Operation LED
The operation LED shows information about the camera’s current operating mode.
Operating Mode
Operation LED
Recording
Blinking red
Ready (Buffering)
Blinking green
Booting up/powering down
Solid red
Mute enabled or Pairing mode
Blinking blue
Axon Respond Livestreaming (may not be
enabled at your agency)
Blinking purple
Low battery or error
Blinking yellow
In a Dock (no other action)
Battery capacity color
Firmware update (while in an Axon Dock)
Solid white
Triad LED (in the field)
In the field, the Triad LED on the front of the camera can be configured to display the
camera’s operating mode.
Operating Mode
Triad LED
Ready (Buffering)
Blinking green
Recording
Blinking red
Triad LED (in an Axon Dock)
In the Axon Dock, the Triad LED on the front of the camera shows the device status and
battery capacity. See the camera display for additional information.
Device Status
Triad LED
Battery is fully charged (> 98%)
Solid green
Battery capacity is at mid-range (33% to 97%)
Solid yellow
Battery capacity is at low-range (< 33%)
Solid red
Uploading data, downloading data, or applying
device settings
Spinning yellow (cycling yellow on each Triad
LED)
Applying a firmware update
Spinning white (cycling white on each Triad LED)
Possible network error. Refer to Troubleshooting
section of the manual or go to
Blinking red and green
Device error. Refer to device page in Axon
Evidence.
Blinking red
