Axminster SS-12VS, User Manual

Page: 13 / 24

Operating Instructions
13
Rise and Full Control Assembly
The table on this sander remains level whilst the
whole motor and disc arrangement tilts. This
allows your work to stay level, improving accuracy
and safety. The disc can be tilted from -5° to +
45°, enabling many tasks to be undertaken. The
disc angles are adjusted by a rack and pinion
arrangement, plus there is a quick action index
system enabling you pre select angles from -5, 0, 15,
22.5, 30 & 45°.
Tilting the Disc Sander
1. Unlock the tilt handle lock (a), see fig 12.
2. Twist the rise and fall Control knob (b), until you
have the correct angle. Then lock the assembly in
place with the locking handle (a). (see fig 12-13)
Fig 12
Fig 13
Fig 14
a
c
d
b
Pre-set/Index system
The Pre-set/index system enables you to pre select
angles from -5, 0, 15, 22.5, 30 & 45°.
1. Unlock the tilt handle lock (a). (see fig 12)
2. Turn the rise and full control knob (b), see fig 13 at
the same time pressing in the Index Pin (c), until it
engages into one of the pre-set holes (d) in the rack
and pinion casting. (see figs 14-15)
3. While holding the Index Pin in, tighten the tilt
handle lock (a), release the Index Pin. (see fig 15)
Fig 15
Continues Over...