CHANGING THE BUFFING MOP
7
DISCONNECT THE BUFFING
MACHINE FROM THE MAINS
SUPPLY.
RECONNECT THE BUFFING
MACHINE TO THE MAINS SUPPLY
AND CONTINUE OPERATION.
Step 4
Remove any build up of debris around the drive shaft to
leave a clean surface.
Step 4
Replace the inner plate washer, insert the mop onto the
drive shaft so it is up against the inner pate washer and
replace the outer plate washer/nut. Tighten the nut
against the rotation of the buffing mop.
Step 1
Hold the mop in place and undo and remove the nut in the
direction of the buffing mop.
Step 2
Remove the plate washer and place safely aside.
Step 3
Remove the buffing mop and place safely aside.