Axis W100, User Manual

Page: 34 / 68

10/19/21, 7:42 PM AXIS W100 Body Worn Camera User manual
https://help.axis.com/axis-w100-body-worn-camera 34/68
To replace a system controller, that is part of the extended body worn system:
If the system controller that you created the system on has failed, you may need to replace
the system controller and restore the system, see
Restore a system with a single system
controller .
You can reset cameras, system controllers, or the entire body worn system, to factory default
settings.
To reset a camera to factory default settings, remove it from the body worn system, see
Remove a camera .
You can reset an extension system controller to factory default settings by removing it from
the body worn system, see
Remove an extension system controller .
If you can’t access the body worn system through AXIS Body Worn Manager, you can reset
each extension system controller by accessing them separately:
Remove a camera .
4. Undock the old camera.
5. Add the new camera to the system, see Add cameras .
Replace extension system controller
1. Remove the old system controller, see Remove an extension system controller .
2. Add the new system controller, see Add system controllers .
Replace system controller
Reset system or hardware
Reset camera
Reset extension system controller
1. Access the extension system controller.
2. Open the context menu .
3. Click Reset system controller
AXIS W100 Body Worn Camera
󰍜