6
USER MANUAL
_____________________________________________________________________________________________________________________
7. Preparing to work
The stand must be used in room where the following requirements must be
fulfilled: temperature must be between 0 to 40
°
C, air humidity 20%
÷
80%.
Preparing device to work:
1.
Put the stand on flat stable surface.
2.
Carefully mount a force meter to the stand by using supplied mounting
element.
3.
Connect supply to stand.
4.
Connect force meter to supply (
if user doesn’t use internal accumulators
).
5.
Turn on the force meter (press ON/OFF) and the stand (press I/Q ).
6.
The stand is ready to work.
Stand must be set in room in such way as to allow easy access
to safety button STOP !
