Axis STAV20, User Manual

Page: 13 / 16

USER MANUAL 13
_____________________________________________________________________________________________________________________
12.2 Force gauge
If force gauge is equipped with wireless module then
Force gauge option is used
for connecting force gauge with stand.
Select
Search option to search for any force gauge nearby.
12.3 Applications
Applications option is used for fitting
stand options to user’s needs. User can set
which work modes are available in
application/functions menu (which modes
are available after pressing key).
12.4 Configuration
- Units – setting units standard,
- Speed – setting max movement speed,
- Peak detect – minimal deviation in % to
state it is a peak,
- Min. Peak
– minimal peak value,
- Overload – Set max force which can act
on force meter,
- Send Start
– enables to send start
command to force meter by key on
stand,
- Send Zero
– enables to zero value on
force meter,
- Interface
– serial interface
communication parameters configuration,
- Printout
– choosing what information is
send (to computer or printer),
- Time&Date
– setting time and date,
- Password – setting password that secures
configuration options,
- Format profiles
– erases motion program
profiles.
APPLICATIONS s
1. Manual:
Enabled/Disabled
2. Peak:
Enabled/Disabled
3. Cycle:
Enabled/Disabled
4. Step:
Enabled/Disabled
5. Advanced:
Enabled/Disabled
6. Exit
CONFIGURATION s
1. Units:
mm/min
2. Speed: 300 mm/min
3. Peak detect: 10%
4. Min. Peak:
1N
5. Overload: 499N
6. Send Start: Off/On
7. Send Zero: Off/On
8. Interface
9. Printout
10. Time&Date
11. Password
12. Firmware update
13. Restore defaults
14. Format profiles
15. Exit