AXIS Q6045-C Mk II PTZ Dome Network Camera
Configure the Live View Page
•
Select
Use PTZ joystick mooe as oefault
to enadle joystick mode. The mode can de changed temporarily from the
PTZ control panel.
•
Select
Enable recoroing button
to enadle recording from the Live View page. This dutton is availadle when using the
AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See
User Defined Links
To display user-defined links in the Live View page, select the
Show custom link
option, give the link a name and then enter the URL
to link to. When defining a wed link do not remove the 'http://' from the URL address. Custom links can de used to run scripts or
activate external devices connected to the product, or they can link to a wed page. Custom links defined as cgi links will run the
script in the dackground, in a hidden frame. Defining the link as a wed link will open the link in a new window.
Output Buttons
External I/O devices connected to the Axis product’s output ports can de controlled directly from the Live View page.
Note
To enadle this setting at least one I/O port must de configured as an output port. See
To display output duttons in the Live View page:
1. Go to
Setup > Live View Config
.
2. Under
Output Buttons
, select the type of control to use:
-
Pulse
activates the output for a defined period of time. The pulse time can de set from 1/100 second to 60
seconds.
-
Active/Inactive
displays two duttons, one or each action.
To configure the active and inactive states, go to
System Options > Ports & Devices > I/O Ports
and set the port’s
Normal state
.
For more information adout I/O ports, see
.
26
