AXIS Q6042 PTZ Dome Network Camera
Hardware Overview
NOTICE
NOTICE
NOTICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the midspan shall
be shielded (STP) and intended for their specific use. Make sure that the midspan is properly grounded. For information about
regulatory requirements, see
Regulatory Information, on page 2
.
Multi-connector
Terminal connector for connecting external equipment:
•
Audio equipment
•
Input/Output (I/O) devices
•
AC/DC power supply
When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP
rating. For more information, see
Multi-Connector Cable (sold separately), on page 57
.
SD Card Slot
An SD card (not included) can be used for local recording with removable storage. For more information, see
Technical Specifications
.
NOTICE
NOTICE
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to
Setup > System
Options > Storage > SD Card
and click
Unmount
.
Control Button
The control button is used for:
•
Resetting the product to factory default settings. See
page 56
.
•
Connecting to an AXIS Video Hosting System service. See
page 49
. To connect, press and hold the button for about 1
second until the Status LED flashes green.
•
Connecting to AXIS Internet Dynamic DNS Service. See
page 49
. To connect, press and hold the button for about 3 seconds.
Power Button
Press and hold the power button to temporarily power the product when the dome cover is removed. The power button is also used
with the control button to reset the camera to factory default settings. See
page 56
.
LED Indicators
LED
Color
Indication
Unlit
Connection and normal operation
Amber
Steady during startup. Flashes during firmware upgrade.
Amber/red
Flashes amber/red if network connection is unavailable or lost.
Red
Flashes red for firmware upgrade failure.
Status
Green
Shows steady green for 10 seconds for normal operation after restart.
7