AXIS Q1798-LE Network Camera
Specifications
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
IDC connector
Use the insulation-displacement connector (IDC) to connect a network cable without an RJ45-connector.
Note
When using the IDC connector, connect a patch cable between the patch cable connector on the foot and the network
connector on the camera assembly.
1–8 IDC connectors
9
Patch cable connector
Pin assignment
Position
T586A
T586B
1
Blue and white
Blue and white
2
Blue
Blue
3
Orange and white
Green and white
4
Orange
Green
5
Green and white
Orange and white
6
Green
Orange
7
Brown and white
Brown and white
8
Brown
Brown
Audio connector
•
Audio in
– 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
Audio input
1 Tip
2 Ring
3 Sleeve
Unbalanced microphone (with or without electret
power) or line
Electret power if selected
Ground
35
