AXIS Q1700-LE License Plate Camera
Specifications
•
Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.
Function Button
The function button has multiple functions:
•
As leveling Assistant
– This function helps to ensure the camera is level. Press the button for about 3 seconds to start the
leveling assistant and press again to stop. The status LED (see
) and buzzer signal assist leveling of the camera.
The camera is level when the buzzer beeps continuously.
•
To view the Status LED
– Press the button once to light up the Status LEDs. Press again to turn them off. The LEDs
will turn off automatically after 10 seconds.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
IDC connector
Use the insulation-displacement connector (IDC) to connect a network cable without an RJ45-connector.
Note
When using the IDC connector, connect a patch cable between the patch cable connector on the foot and the network
connector on the camera assembly.
1–8 IDC connectors
9
Patch cable connector
Pin assignment
Position
T586A
T586B
1
Blue and white
Blue and white
2
Blue
Blue
3
Orange and white
Green and white
24
