Axis P5514-E Series Page 45 User Manual Download | Manualshive

Page: 45 / 61

background image

AXIS P5514-E PTZ Network Camera

System Options

Linux/Unix example

arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125

Windows syntax

(this may require that you run the command prompt as an administrator)

arp -s <IP address> <serial number>
ping -l 408 -t <IP address>

Windows example

(this may require that you run the command prompt as an administrator)

arp -s 192.168.0.125 00-40-8c-18-10-00
ping -l 408 -t 192.168.0.125

4. Check that the network cable is connected and then restart the product by disconnecting and reconnecting power.

5. Close the command prompt when the product responds with

Reply from 192.168.0.125:...

or similar.

6. Open a browser and type

http://<IP address>

in the Location/Address field.

For other methods of assigning the IP address, see the document

Assign an IP Address and Access the Video Stream

on Axis Support

web at

www.axis.com/techsup

Note

• To open a command prompt in Windows, open the

Start menu

and type

cmd

in the

Run/Search

field.

• To use the ARP command in Windows 8/Windows 7/Windows Vista, right-click the command prompt icon and select

Run as administrator

.

• To open a command prompt in Mac OS X, open the

Terminal utility

from

Application > Utilities

.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from
any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

The AVHS settings are configured under

System Options > Network > TCP IP > Basic

. The possibility to connect to an AVHS service

is enabled by default. To disable, clear the

Enable AVHS

box.

One-click enabled -

Press and hold the product’s control button (see

Hardware Overview on page 7

) for about 3 seconds to

connect to an AVHS service over the Internet. Once registered,

Always

will be enabled and the Axis product stays connected to

the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect
from the AVHS service.

Always -

The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will

stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the
one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see

www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to

System Options > Network > TCP/IP > Basic

. Under

Services

, click the AXIS Internet Dynamic DNS Service

Settings

button (requires access to the Internet). The domain name currently

registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Note

AXIS Internet Dynamic DNS Service requires IPv4.

45

«
...
43
44
45
46
47
...
»

Summary of Contents for P5514-E Series






























































Reviews:

No comments

Related manuals for P5514-E Series

BL-C1A - Network Camera

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 8

SMARTCAM SNH-V6414BN

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 96

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

FL 50 - Hot-shoe clip-on Flash

Brand: Olympus Pages: 18

80 - Stylus 80 Quartz Date 35mm Camera

Brand: Olympus Pages: 13

80 - Stylus 80 Quartz Date 35mm Camera

Brand: Olympus Pages: 13

550WP - Stylus Digital Camera

Brand: Olympus Pages: 70

550WP - Stylus Digital Camera

Brand: Olympus Pages: 70

550WP - Stylus Digital Camera

Brand: Olympus Pages: 70

Zuiko Digital ED 9-18mm f4.0-5.6

Brand: Olympus Pages: 2

ZUIKO DIGITAL ED 70-300mm F4.0-5.6

Brand: Olympus Pages: 2

Zuiko digital ED 50-200mm f2.8-3.5 SWD

Brand: Olympus Pages: 2

226730 - Stylus Tough 6000 Digital Camera

Brand: Olympus Pages: 86

226705 - Stylus 9000 Digital Camera

Brand: Olympus Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands