Axis P3224-LV Mk II User Manual Download Page 26

Page: 26 / 63

AXIS P3224-LV Network Camera

PTZ (Pan Tilt Zoom)

3. Specify the pause length between runs.

4. Select an available preset position and click

Apply

5. Specify the

View Time

in seconds or minutes.

6. Specify the

View Order

or select the

Random view order

option.

7. Click

Save

To modify or remove guard tours, go to

PTZ > Guard Tour

, select the guard tour in the

Guard Tour List

and click

Modify/Remove

Note

For products that support Limited Guard Tour, the product has a fixed minimum view time

For more information see the online help

Advanced

Controls

Advanced PTZ settings can be configured under

PTZ > Advanced > Controls

The

Panel Shortcut Command Buttons

list shows the user-defined buttons that can be accessed from the Live View page’s

Ctrl

panel

. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface.

Click

Add

to add a new shortcut command button.

The following PTZ controls are enabled by default:

•

Pan control

•

Tilt control

•

Zoom control

To disable specific controls, deselect the options under

Enable/Disable controls

If using multiple view areas, deselecting a control will only disable the control in the selected view area.

Note

Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to
preset positions that require a tilt movement.

Control Queue

Note

• The administrator can enable and disable PTZ controls for selected users.

• To identify different users in the viewer group, cookies must be enabled on the client.

• The

Control queue polltime

is measured in seconds. For more information see the online help

The administrator can set up a queue for PTZ controllers from

PTZ > Control Queue

. Once set up, the

PTZ Control Queue

buttons

appear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.

A user who belongs to a group (see

Users on page 44

) with a higher PTZ priority can go before other users in the queue and take

control of the product. The order of priority is as follows:

Administrator

— An administrator takes over PTZ control regardless of who is first in queue. The administrator will be

removed from the queue 60 seconds after the last PTZ control command.

Summary of Contents for P3224-LV Mk II
































































Search results

Summary of Contents for P3224-LV Mk II

Reviews:

Related manuals for P3224-LV Mk II

Brands by name

Popular brands

Axis P3224-LV Mk II, User Manual

Search results

Summary of Contents for P3224-LV Mk II

Reviews:

Related manuals for P3224-LV Mk II

Brands by name

Popular brands