Axis P1365-E Mk II User Manual Download Page 9

Page: 9 / 74

AXIS P1365-E Mk II Network Camera

Hardware Overview

•

Digital output

– For connecting external devices such as relays and LEDs. Connected devices can be activated by the

VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output will
show as active (shown under

System Options > Ports & Devices

) if the alarm device is activated.

•

Digital input

– An alarm input for connecting devices that can toggle between an open and closed circuit, for example:

PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input becomes
active (shown under

System Options > Ports & Devices

Audio Connector

The Axis product has the following audio connectors:

•

Audio in (pink)

– 3.5 mm input for a mono microphone, or a line-in mono signal.

•

Audio out (green)

– 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an

active speaker with a built-in amplifier. A stereo connector must be used for audio out.

For audio in, the left channel is used from a stereo signal.

RS485/RS422 Connector

Two terminal blocks for RS485/RS422 serial interface used to control auxiliary equipment such as pan-tilt devices.

SD Card Slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or

unmount the SD card from the Axis product’s webpages before removal.

This product supports microSD/microSDHC/microSDXC cards (not included).

For SD card recommendations, see

www.axis.com

Control Button

For location of the control button, see

Hardware Overview on page 7

The control button is used for:

•

Enabling the Focus Assistant. Press and very quickly release the Control button.

•

Resetting the product to factory default settings. See

page 64

•

Connecting to an AXIS Video Hosting System service. See

page 55

. To connect, press and hold the button for about 3

seconds until the Status LED flashes green.

•

Connecting to AXIS Internet Dynamic DNS Service. See

page 55

. To connect, press and hold the button for about 3 seconds.

LED Indicators

Note

• The Status LED can be configured to be unlit during normal operation. To configure, go to

Setup > System Options > Ports

& Devices > LED

. See the online help for more information.

• The Status LED can be configured to flash while an event is active.

• The Status LED can be configured to flash for identifying the unit. Go to

Setup > System Options > Maintenance

Summary of Contents for P1365-E Mk II











































































Search results

Summary of Contents for P1365-E Mk II

Reviews:

Related manuals for P1365-E Mk II

Brands by name

Popular brands

Axis P1365-E Mk II, User Manual

Search results

Summary of Contents for P1365-E Mk II

Reviews:

Related manuals for P1365-E Mk II

Brands by name

Popular brands