AXIS M7014 Video Encoder
Hardware Overview
1
Mounting holes
2
BNC connector
3
LED indicators for power, status, network
4
Control button
5
Network connector (PoE)
6
Power connector
7
RS485/RS422 connector
8
microSD card slot
LED Indicators
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go
to
Setup > System Options > Ports & Devices > LED
. See the online help for more
information.
• The Status LED can be configured to flash while an event is active.
Status LED
Indication
Green
Steady green for normal operation.
Amber
Steady during startup, during reset to factory default or when
restoring settings.
Red
Flashes red for firmware upgrade failure.
10
Summary of Contents for M7014
