AXIS M5065 PTZ Network Camera
About wireless I/O (Z-Wave Plus
®
)
9. Select the preset position you want the camera to go to.
10. If you want the camera to return to it’s home position, select
Return to home when the rule is no longer active
and
specify how long you want the camera to wait at the current preset position before returning to home.
11. Click
Ok
.
To record video, add an additional action rule:
12. Go to
Events > Action Rules
and click
Add
.
13. Select
Enable rule
and enter a descriptive name for the rule.
14. From the list of triggers, select
PTZ
and then select
Preset Reached
.
15. Select the preset position.
16. From the list of actions, select
Record video
.
17. Select an existing stream profile or create a new one.
18. Enable and set the pre-trigger time to 5 seconds.
19. Enable
While the rule is active
.
20. Enable and set the post-trigger time to 60 seconds.
21. Select
SD card
from the list of storage options.
22. Click
Ok
.
About using Z-Wave as I/O
This product does not have any physical I/O connectors, but you can use some Z-Wave functions through the I/O interface.
Each connected Z-Wave device is assigned an I/O port number. To see the port numbers, go to
Setup > System Options > Ports &
Devices > I/O Ports
. The I/O port number can be changed in the Z-Wave device’s information window.
When used as an Digital Input Port event, only one function of the Z-Wave device can be used. The default function depends on what
type of device it is. To change which function is used, go to the device’s information window.
For more information about using I/O ports see the product's built-in help.
41
