Axis M1114-E User Manual Download | Manualshive

Page: 45 / 55

background image

AXIS M1114–E

System Options

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating
systems and clients that support this protocol.

Bonjour can be disabled under

System Options > Network > Bonjour

.

Storage

Network Share

Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for
recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to

www.axis.com/products/cam_companion_software/supported.htm

Note

For NAS recommendations see

www.axis.com

To add a network share:

1. Go to

System Options > Storage

.

2. Click

Network Share

.

3. Enter the IP address, DNS or Bonjour name to the host server in the

Host

field.

4. Enter the name of the share in the

Share

field. Sub folders cannot be used.

5. If required, select

The share requires login

and enter the user name and password.

6. Click

Connect

.

To clear all recordings and data from the Axis product’s folder on the designated share, click

Clear

under

Storage Tools

.

To avoid filling the share, it is recommended to remove recordings continuously. Under

Recording Settings

, select

Remove recordings

older than

and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select

Lock

under

Recording Settings

.

Maintenance

The Axis product provides several maintenance functions. These are available under

System Options > Maintenance

.

Click

Restart

to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current

settings.

Note

A restart clears all entries in the Server Report.

Click

Restore

to reset most settings to the factory default values. The following settings are not affected:

•

the boot protocol (DHCP or static)

•

the static IP address

•

the default router

•

the subnet mask

•

the system time

45

«
...
43
44
45
46
47
...
»

Summary of Contents for M1114-E
























































Reviews:

No comments

Related manuals for M1114-E

Brand: Samsung Pages: 44

Brand: iCamera Pages: 58

Brand: FEIYUTECH Pages: 19

Brand: Zhiyun Pages: 10

Brand: Sacred Sun Pages: 19

Brand: Mamiya Pages: 6

Brand: Channel Plus Pages: 4

Brand: Festo Pages: 156

Brand: Ecco Pages: 24

Brand: Librestream Pages: 6

Brand: Pentax Pages: 2

T737 - Digital Camera - Compact

Brand: Polaroid Pages: 58

NG-IPCAMEV8180A

Brand: Net Generation Pages: 33

Brand: Lilin Pages: 12

Brand: Easylife Pages: 4

Brand: M-system Pages: 8

Brand: Neato Robotics Pages: 16

Brand: DRIFT Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands