Axis M1075-L User Manual Download Page 23

Page: 23 / 60

AXIS M1075-L Box Camera

The device interface

Output

: Shows the type of output.

Gain

: Use the slider to change the gain. Click the speaker icon to mute or unmute.

Stream

Encoding

: Select the encoding to use for the input source streaming. You can only choose encoding if audio input is turned on. If

audio input is tuned off, click

Enable audio input

to turn it on.

Audio clips

Add clip

: Click to add a new audio clip.

Click to play the audio clip.

Click to stop playing the audio clip.

The context menu contains:

•

Rename

: Change the name of the audio clip.

•

Create link

: Create a URL which, when used, plays the audio clip on the device. Specify the volume and number

of times to play the clip.

•

Download

: Download the audio clip to your computer.

•

Delete

: Delete the audio clip from the device.

Audio mixer

Input

Ten Band Graphic Audio Equalizer

: Turn on to adjust the level of different frequency bands within an audio signal.

Voice enhancement

: Turn on to adjust the voice content in relation to other sounds.

Recordings

Click to filter the recordings.

From

: Show recordings done after a certain point in time.

: Show recordings up until a certain point in time.

Source

: Show recordings based on source.

Event

: Show recordings based on events.

Storage

: Show recordings based on storage type.

Summary of Contents for M1075-L





























































Search results

Summary of Contents for M1075-L

Reviews:

Related manuals for M1075-L

Brands by name

Popular brands

Axis M1075-L, User Manual

Search results

Summary of Contents for M1075-L

Reviews:

Related manuals for M1075-L

Brands by name

Popular brands