Amazon Echo Plus
Important:
Direct integration only works with Echo Plus and Echo Show. Other products in the
Amazon Echo line are not compatible with AXIS Gear.
Before you begin, please make sure that:
- Gear is configured and put into Smart Home Mode
- Echo Plus is set up and configured
- The Amazon Alexa App is set up on your mobile device
JOIN GEAR TO AMAZON ECHO PLUS
1. Open the
Amazon Alexa
app and navigate to
Smart Home
2. Mark your Echo Plus 'discoverable':
a. Say "Alexa, discover devices," OR
b. Go to the
Smart Home
section and click on the
+ icon > Add Device
3. Immediately press
Pair
on your AXIS Gear. Echo Plus will discover AXIS Gear as ‘First
Device' (or Second, or Third).
The touch strip flashes green twice to indicate a successful pairing
To verify, go to All Devices in the Devices screen. The Gear will appear as 'First Device' (or
Second, or Third)]
VOICE COMMANDS
1. In the
Devices
screen click on the
+
icon in the top right corner
2. Select
Add Group
and choose a room name
3. Select the Gears that will be part of the group
4. Now you can use the following commands which Alexa can process:
"Set [room] to ___%" - all blinds go to desired percentage
NOTE: You may also control each device by using the name given to the device. For example,
"Set First Device to 50%"
SCHEDULES
1. Go to
Routine > Add Routine
2. Select
Schedule
under
When this happens
and set a time, press
Next
3. Select
Smart Home
, select
Smart Home
, select
Control Device
, select the device
4. Select
Brightness
and set a value anywhere between 0% and 100% (0% is close, 100% is
open)
