AXIS Q60 Series
Specifications
SD card slot
NO
NO
NOTICE
TICE
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product’s webpage before removal.
This product supports SD/SDHC/SDXC cards.
For SD card recommendations, see
.
SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered
trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
•
Resetting the product to factory default settings. See
Reset to factory default settings on page 25
Power button
Press and hold the power button to temporarily power the product when the dome cover is removed. The power button is also used
with the control button to reset the camera to factory default settings. See
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
Multiconnector
Terminal connector for connecting external equipment:
•
Audio equipment
•
Input/Output (I/O) devices
•
AC/DC power supply
When connecting external equipment, a separately sold Axis multicable is required in order to maintain the product’s IP rating.
For more information, see
Multicable connectors on page 31
30
