AXIS P3807-PVE Network Camera
Additional settings
Image quality
Level the camera
To adjust the view in relation to a reference area or object, use the leveling guide in combination with a mechanical adjustment
of the camera.
1. Go to
Settings > System > Orientation
and click
.
2. Adjust the camera mechanically until the position of the reference area or object, is aligned with the leveling guide.
Capture modes
Capture mode defines the maximum frame rate available in the Axis product. Depending on which capture mode you select, you
may not be able to use WDR.
A capture mode consists of a resolution and the corresponding frame rate available in the product. The capture mode setting
affects the camera’s field of view and aspect ratio.
The lower resolution capture mode is cropped out from the highest resolution.
The image shows how the field of view and aspect ratio can change between two different capture modes.
Which capture mode to choose depends on the requirements of frame rate and resolution for the specific surveillance setup. For
specifications about available capture modes, see the product’s datasheet at
Select capture mode
Which capture mode to choose depends on the requirements of frame rate and resolution for the specific surveillance setup. For
specifications about available capture modes, see the product’s datasheet. To find the latest version of the datasheet, go to
Select exposure mode
There are different exposure mode options in the camera that adjusts aperture, shutter speed, and gain to improve image quality for
specific surveillance scenes. Go to
Settings > Image > Exposure
and select between the following exposure modes:
•
For most use cases, select
Automatic
exposure.
•
For environments with certain artificial lighting, for example fluorescent lighting, select
Flicker-free
.
Select the same frequency as the power line frequency.
8
