AXIS Camera Station S10 Recorder Series
Get Started with AXIS Camera Station - S1016 Mk II
Start AXIS Camera Station Client and the wizard
“Get Started with AXIS Camera Station”
starts
automatically.
“Get Started with AXIS Camera Station”
provides a quick way to add cameras and
to configure and enable recording:
1. Register your pre-installed licenses.
2. Connect to the local S10 server.
3. Select cameras and video encoders to add.
4. Select recording methods and where to store recordings.
5. Review settings and click
Finish
to add cameras .
6. Start recording and viewing with AXIS Camera Station
For more information, see the built-in help and AXIS Camera Station User Manual available
at
www.axis.com
Get Started with AXIS Camera Station - S9002, S9101 and
S9201
Note
Make sure that AXIS Camera Station server is running on AXIS S1016 Mk II /
AXIS S1032 Mk II / AXIS S1048 Mk II Recorder before you follow the steps below.
1. Start AXIS Camera Station Client.
2. Connect to the S10 Recorder. For more information, see the built-in help and AXIS
Camera Station User Manual available at
www.axis.com
.
3. Select cameras and video encoders to add.
4. Select recording methods and where to store recordings.
5. Review settings and click
Finish
to add cameras and start recording or viewing with
AXIS Camera Station.
Specification
Note
Offerings may vary by region. The following specifications are only those required by law to ship
with your computer. For more information regarding the configuration of your computer, click Start
> Help and Support and select the option to view information about your computer
Power
14
Summary of Contents for Camera Station S9002
Page 17: ...17...