AXIS Q87 Bispectral PTZ Network Camera Series
Troubleshooting
Troubleshooting
Reset to factory default settings
CAUTION
Risk of injury. Moving parts. Keep your body parts away from the product when in operation. Disconnect from power
supply before installing or performing maintenance on the product.
CAUTION
Risk of injury. Hot surface. Do not touch the product when in operation. Disconnect from power supply and allow the
surfaces to cool before performing maintenance on the product.
NO
NO
NOTICE
TICE
TICE
Removing the top cover exposes parts of the visual camera that are sensitive to impact. Avoid hitting the unprotected camera
with the top cover at disassembly.
Important
Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP
address, to the factory default values.
Note
The installation and management software tools are available from the support pages on
www.axis.com/support/downloads
1. Disconnect power from the product.
2. Loosen the four top cover screws and remove the top cover.
3. Change the position of the Factory default switch.
4. Replace the top cover and tighten the screws (torque 2.0 Nm).
15
