LUBRICATION
The rod on which the
product holder
slides, which is underneath the slicer, should be
lubricated weekly with several drops of oil. Machine without oiler. Lift up the machine and
oil the rod directly. After the lubrication have the carriage sliding 4 or 5 times.
Use oil SHELL ONDINA 15 or ESSO MARCOL 82.
Occasionally, the
slice thickness plate
slide rod should be coated lightly with lubricant.
Turn the
slice thickness control
fully counterclockwise when lubricating this slide rod
and then turn it fully clockwise when finished.
DO NOT lubricate the rod on which the
last slice device
slides.
It must be kept clean but not lubricated. The motor has sealed bearings and requires no
lubrication maintenance.
WEAR ADJUSTMENT
After several years of operation and many sharpenings of the blade it may become
necessary to have the slice thickness plate adjusted closer to the blade.
INSTALLATION
MAINTENANCE
SLICER
INSTALLATION
UNPACKING
Immediately after unpacking the slicer, check it for possible shipping damage. If this
machine is found to be damaged after unpacking, save the packing material and contact
the carrier within 15 days of delivery.
Prior to installation, test the elettrical service to assure that it agrees with the
specifications on the machine data plate
1
.
ELECTRICAL
WARNING:
THIS MACHINE IS PROVIDED WITH THIS PLUG MUST BE
CONNECTED TO PROPERLY GROUNDING PLUG, GROUNDED OUTLET. IF THE
RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN
ELECTRICIAN.
CLEANING
This machine must be thoroughly cleaned and sanitized after installation and before
being put into service.
SAFETY
SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT
OPERATING POSITIONS ANYTIME THE SLICER IS IN USE.
The
blade cover
5
must be in position over the knife and secured by tightening
the hand knob.
The
Iast slice device
4
must be used when slicing it keep your hands away from
the blade.
When the slicer is not running, the
slicer thickness control
2
must be set on zero
(fuIly clockwise) to prevent the blade edge from being exposed. Always UNPLUG the
power cord before cleaning or moving the slicer.
GB
AX-S9 Ultra
AX-S10 Ultra
AX-S12 Ultra
AX-SD12 Ultra
PLEASE CALL AXIS EQUIPMENT FOR PARTS & SERVICE FOR YOUR
SLICER AT: (514) 737-9701 / (888) 275-4538
Filename: Man_AX_S_Serie_Ultra_GB.PMD 03/02/15
Dimension mm
Slicing capacity mm
B
A
C
Motor
Data
AX-S9Ultra
AX-S10Ultra AX-S12Ultra AX-SD12Ultra
Volts
115
Hz
60
Ph
1
Amp
1,5
1,5
2,5
2,5
N/min
1750
AX-S9Ultra
AX-S10Ultra
AX-S12Ultra AX-SD12Ultra
E
330
360
390
470
F
280
280
320
365
G
410
410
450
500
H
360
360
420
455
L
590
590
600
630
AX-S9Ultra AX-S10Ultra
AX-S12Ultra AX-SD12Ultra
A
140
140
150
200
B
190
190
220
270
C
170
170
210
235
Weight
AX-S9Ultra
AX-S10Ultra AX-S12Ultra
AX-SD12Ultra
Net kg
12
13
18
24
Brut kg
15
16
22
29
RETURN